unofficial twrp 3.2.3 Root Cubot P20

Download twrp 3.2.3 Root Cubot P20:

unofficial build of twrp 3.2.3 have Now been available for the Cubot P20 user Who own Cubot P20 Smartphone can Root it by following the Below Instructions.  to Install twrp Recovery on Cubot P20 First You need to unlock it’s bootloader after that You Can Root it by Flashing Magisk 20.03.zip.

Cubot P20 Run on Mediatek MT6750 SoC along With Android 8.0 4GB of RAM and 64GB of Internal Memory. it Come with 6.1 Inch IPS Display With the Resolution of 1080 X 2246 Pixels.

Disclaimer:

  1. Rooting May Void Your Device Warranty
  2. Make a backup & Move it to Safe Place Like Pen Drive or PC.
  3. Make Sure your Phone at-least 50% Charge to Prevent accidental Shut Down During The Rooting process.

Download Files:

  1. Magisk 20.03
  2. No verity opt Encrypt
  3. twrp 3.2.3 Cubot P20
  4. Platform tools/adb Fastboot tools

How to Install twrp Recovery on Cubot P20:

  • Download & Setup adb Fastboot tools/Platform tools
  • Download and Extract recovery.img [Must rename recovery.img] file In the adb tools Folder.
  • Reboot phone to bootloader by together Pressing Volume Down and Power button.
  • Connect Phone to PC using the usb cable.
  • open CMD in the adb tools Folder and type below Code.

Check Device by Sending below Command:a

fastboot devices

unlock bootloader by Sending below Command:

fastboot oem unlock
if fail
fastboot flashing unlock

flash Recovery by Sending below Command:

fastboot flash recovery recovery.img
fastboot boot recovery.img



Method 2: Install With SP Flash tools:

  • Download and Extract SP Flash tools on PC
  • Install Mediatek V-COM Driver on PC
  • Download & Extract twrp image with Scatter
  • Run SP Flash tools From Main Screen Select Scatter File Navigate Scatter.txt File form the twrp Folder
  • From the Partition List Select Recovery Partition only. and then Double Click on it Select twrp recovery.img File
  • Click Download and Connect Your Switched off Phone. Done.

How to Root Cubot P20:

  1. Download & Move Magisk 20.03.zip to Device Storage.
  2. Reboot phone to twrp by Pressing Volume up and Power button
  3. Make a Nandroid backup
  4. Flash Magisk 20.03 and No_verity _opt_encrypt.ZIP via Install.
  5. Reboot System now