unofficial twrp 3.3.1 Root bq Aquaris X2 Pro (ZangyaPro)

Download twrp 3.3.1 Root bq Aquaris X2 Pro:

unofficial build of twrp 3.3.1 have Now been available for the bq Aquaris X2 Pro user Who own bq Aquaris X2 Pro can Root it using the Below Instructions.  to Install twrp Recovery on bq Aquaris X2 Pro First You need to unlock it’s bootloader after that You Can Root it by Flashing Magisk

bq Aquaris X2 Pro Run on QCOM SD 660 SoC along With Android 8.1 4GB of RAM and 64GB of Internal Memory. it Come with 5.6 Inch IPS Display With the Resolution of 1080 X 2160 Pixels.


  1. Rooting May Void Your Device Warranty
  2. Make a backup & Move it to Safe Place Like Pen Drive or PC.
  3. Make Sure Your Phone at-least 50% Charge to Prevent accidental Shut Down during the Rooting Process.

Download Files:

  1. Magisk 19.3
  2. vbmeta.img
  3. twrp 3.3.1 bq Aquaris X2 Pro
  4. Platform tools/adb Fastboot tools
  5. unlocked bootloader required

Note: Flash vbmeta to fix any bootloop issue..

How to Install twrp Recovery on bq Aquaris X2 Pro:

  • Download & Setup Platform tools
  • Download and Extract recovery.img & vbmeta file In Platform tools Folder.
  • Reboot Phone to bootloader by together holding Volume Down and Power Button
  • Connect Phone to PC using the usb cable.
  • open CMD in the Platform tools Folder and Send below Code.

Check Device by Sending below Command:

fastboot devices

flash Recovery by Sending below Command:

fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot boot recovery.img

How to Root bq Aquaris X2 Pro:

  1. Download & Move Magisk to Device Storage.
  2. Reboot phone to twrp by Pressing Volume up and Power button
  3. Make a Nandroid backup
  4. Flash Magisk 19.3 and No_verity _opt_encrypt.ZIP via Install.
  5. Reboot System now