(update) unofficial twrp 3.4.0 for ZTE blade 20 Smart

Download twrp 3.4.0 Root ZTE blade 20 Smart:

unofficial twrp 3.4.0 have Now been available for the ZTE blade 20 Smart, user Who own ZTE blade 20 Smart can Root it by following the below Instructions.  to Install twrp Recovery on ZTE blade 20 Smart First You Need to unlock it’s bootloader after that You Can Root it by flashing Magisk 21.4.zip.

ZTE blade 20 Smart Run on Mediatek MT6771 SoC along With Android 9.0 4GB of RAM and 128GB of Internal Memory. the device come with 6.4 Inch IPS Display with the resolution of 720X1560 Pixels.

Disclaimer:

  1. Rooting May Void Your Device Warranty
  2. Make a backup & Move it to Safe Place Like Pen Drive or PC.
  3. Make Sure Your Phone at-least 50% Charge to Prevent accidental Shut Down during the Rooting Process.

Download Files:

  1. Magisk 21.4
  2. vbmeta.img
  3. twrp 3.4.0 blade 20 Smart
  4. orange-Red-State disabler
  5. No-verity-opt-encrypt.zip
  6. Platform tools/adb Fastboot tools

How to Install twrp Recovery on ZTE blade 20 Smart:

  • Download & Setup Platform tools
  • Download and Extract recovery.img & vbmeta file In Platform tools Folder
  • Reboot Phone to bootloader by together holding Volume down and Power button
  • Connect Phone to PC by using the usb cable
  • open CMD in the Platform tools Folder and send below code

unlock bootloader by sending below command:

fastboot flashing unlock
or 
fastboot oem unlock
  • on phone confirm unlock by pressing volume up key

flash recovery by sending below command:

fastboot flash vbmeta vbmeta.img
fastboot flash recovery recovery.img
fastboot erase userdata
fastboot boot recovery.img

Install using SP Flash tool:

  • Download and Extract SP Flash tools on PC
  • Install Mediatek V-COM Driver on PC
  • Download & Extract twrp image with Scatter
  • Run SP Flash tools From Main Screen Select Scatter File Navigate Scatter.txt File form the twrp folder and again same Navigate and Select DA File
  • From the Partition List Select Recovery Partition only. and then Double Click on it Select twrp recovery.img File
  • Click Download and Connect Your Switched off Phone.

once done, don’t bootup Phone, directly Go to Recovery (by holding Volume+ & Power Key) & Flash Magisk 20.3.zip & No verity opt encrypt.zip

How to Root ZTE blade 20 Smart:

  1. Download & move Magisk 21.4.zip to device storage
  2. Reboot phone to twrp by Pressing Volume up and Power button
  3. Make a Nandroid backup
  4. Flash Magisk 21.4 and No_verity _opt_encrypt.ZIP via Install
  5. Flash orange_State_Disabler.zip to Remove orange State Warning.
  6. Reboot System Now