unofficial twrp 3.3.1 Root ZTE Blade 20 Smart

Download twrp 3.3.1 Root ZTE Blade 20 Smart:

unofficial build of twrp 3.3.1 have Now been available for the ZTE Blade 20 Smart user Who own ZTE Blade 20 Smart Smartphone can Root it by following the Below Instructions.  to Install twrp Recovery on ZTE Blade 20 Smart First You need to unlock it’s bootloader after that You Can Root it by Flashing Magisk 19.3.zip.

ZTE Blade 20 Smart Run on Mediatek MT6771 SoC along With Android 9 4GB of RAM and 128GB of Storage.it Come With 6.4 Inch IPS Display With the Resolution of 720 X 1560 Pixels.

Disclaimer:

  1. Rooting May Void Your Device Warranty
  2. Make a backup & Move it to Safe Place Like Pen Drive or PC.
  3. Make Sure your Phone at-least 50% Charge to Prevent accidental Shut Down During The Rooting process.

Download Files:

  1. Magisk 19.3
  2. No verity opt Encrypt
  3. twrp 3.3.1 ZTE Blade 20 Smart
  4. Platform tools/adb Fastboot tools

How to Install twrp Recovery on ZTE Blade 20 Smart:

  • Download & Setup adb Fastboot tools/Platform tools
  • Download and Extract recovery.img [Must rename recovery.img] file In the adb tools Folder.
  • Reboot phone to bootloader by together Pressing Volume Down and Power button.
  • Connect Phone to PC using the usb cable.
  • open CMD in the adb tools Folder and type below Code.

Check Device by Sending below Command:a

fastboot devices

unlock bootloader by Sending below Command:

fastboot oem unlock
if fail
fastboot flashing unlock

flash Recovery by Sending below Command:

fastboot flash recovery recovery.img
fastboot boot recovery.img

Method 2: Install With SP Flash tools:

  • Download and Extract SP Flash tools on PC
  • Install Mediatek V-COM Driver on PC
  • Download & Extract twrp image with Scatter
  • Run SP Flash tools From Main Screen Select Scatter File Navigate Scatter.txt File form the twrp Folder
  • From the Partition List Select Recovery Partition only. and then Double Click on it Select twrp recovery.img File
  • Click Download and Connect Your Switched off Phone. Done.

How to Root ZTE Blade 20 Smart:

  • Download & Move Magisk 19.3.zip to Device Storage.
  • Reboot phone to twrp by Pressing Volume up and Power button
  • Make a Nandroid backup
  • Flash Magisk 19.3 and No_verity _opt_encrypt.ZIP via Install.
  • Flash orange_State_Disabler.zip From No_verity_Opt_Encrypt Folder to Remove orange State Warning.
  • Reboot System Now…..