unofficial twrp 3.3.1 Root Doogee S90

Download twrp 3.3.1 Root Doogee S90:

unofficial build of twrp 3.3.1 have Now been available for the Doogee S90 Clone user Who own Doogee S90 Smartphone can Root it using the Below Instructions.  to Install twrp Recovery on Doogee S90 First You need to unlock it’s bootloader after that You Can Root it by Flashing Magisk 19.3.zip.

Doogee S90 Run on Mediatek Helio P60 SoC along With Android 8.1 6GB of RAM and 128GB of Internal Memory. it Come with 6.1 Inch IPS Display With the resolution of 1080 X 2246 Pixels.

Disclaimer:

  1. Rooting May Void Your Device Warranty
  2. Make a backup & Move it to Safe Place Like Pen Drive or PC.
  3. Make Sure your Phone at-least 50% Charge to Prevent accidental Shut Down During The Rooting process.

Download Files:

  1. Magisk 19.3
  2. No verity opt Encrypt
  3. twrp 3.3.1 Doogee S90
  4. Platform tools/adb Fastboot tools

How to Install twrp Recovery on Doogee S90:

  • Download & Setup adb Fastboot tools/Platform tools
  • Download and Extract recovery.img [Must rename recovery.img] file In the adb tools Folder.
  • Reboot phone to bootloader by together Pressing Volume Down and Power button.
  • Connect Phone to PC using the usb cable.
  • open CMD in the adb tools Folder and type below Code.

Check Device by Sending below Command:

fastboot devices

unlock bootloader by Sending below Command:

fastboot oem unlock
if fail
fastboot flashing unlock

flash Recovery by Sending below Command:

fastboot flash recovery recovery.img
fastboot boot recovery.img

Method 2: Install With SP Flash tools:

  1. Download and Extract SP Flash tools on PC
  2. Install Mediatek V-COM Driver on PC
  3. Download & Extract twrp image with Scatter
  4. Run SP Flash tools From Main Screen Select Scatter File Navigate Scatter.txt File form the twrp Folder
  5. From the Partition List Select Recovery Partition only. and then Double Click on it Select twrp recovery.img File
  6. Click Download and Connect Your Switched off Phone. Done.

How to Root Doogee S90:

  1. Download & Move Magisk 19.3.zip to Device Storage.
  2. Reboot phone to twrp by Pressing Volume up and Power button
  3. Make a Nandroid backup
  4. Flash Magisk 19.3 and No_verity _opt_encrypt.ZIP via Install.
  5. Flash orange_State_Disabler.zip From No_verity_Opt_Encrypt Folder to Remove orange State Warning.
  6. Reboot System now