unofficial twrp 3.2.1 Root BQ Aquaris X Pro (bardock)

Download twrp 3.2.1 Root BQ Aquaris X Pro:

unofficial build of twrp 3.2.1 have Now been available for the BQ Aquaris X Pro user Who own BQ Aquaris X Pro can Root it by following the below Instructions.  to Install twrp Recovery on BQ Aquaris X Pro first you need to unlock it’s bootloader after that You can Root it by flashing Magisk 21.4.zip.

BQ Aquaris X Pro Run on QCOM SD 626 SoC along With Android 7.1 3/4GB of RAM and 32/64GB of Internal Memory. it come with 5.2 Inch IPS Display with the Resolution of 1080 X 1920 Pixels.

Disclaimer:

  • Rooting May Void Your Device Warranty
  • Make a backup & Move it to Safe Place Like Pen Drive or PC.
  • Make Sure Your Phone at-least 50% Charge to Prevent accidental Shut Down during the Rooting Process.

Download Files:

  1. Magisk 21.4
  2. twrp 3.2.1 BQ Aquaris X Pro
  3. Platform tools/adb Fastboot tools

Note: Flash vbmeta to fix any bootloop issue..

How to Install twrp Recovery on BQ Aquaris X Pro:

  • Download & Setup Platform tools
  • Download and Extract recovery.img & vbmeta file In Platform tools Folder.
  • Reboot Phone to bootloader by together holding Volume Down and Power Button
  • Connect Phone to PC using the usb cable.
  • open CMD in the Platform tools Folder and Send below Code.

Check Device by Sending below Command:

fastboot devices

flash Recovery by Sending below Command:

fastboot flashing unlock
fastboot flash recovery recovery.img
fastboot boot recovery.img

don’t bootup Phone, directly Go to recovery (by holding volum+ & Power key) & Follow Rooting Steps

How to Root BQ Aquaris X Pro:

  1. Download & Move Magisk 21.4.zip to Device Storage.
  2. Reboot phone to twrp by Pressing Volume up and Power button
  3. Make a Nandroid backup
  4. Flash Magisk 21.4 and No_verity _opt_encrypt.ZIP via Install.
  5. Reboot System now