unofficial twrp 3.3.1 Root Telstra Evoke Plus

Download twrp 3.3.1 Root Telstra Evoke Plus:

unofficial build of twrp 3.3.1 have Now been available for the Telstra Evoke Plus, user Who own Telstra Evoke Plus can Root it by following the below Instructions.  to Install twrp Recovery on Telstra Evoke Plus First You need to unlock it’s bootloader after that You can Root it by Flashing Magisk 21.4.zip.

Telstra Evoke Plus Run on Mediatek MT6761 SoC along With Android 9.0 2GB of RAM and 16GB of Internal Storage. The device come with 6.09 Inch IPS display with the resolution of 720 X 1440 Pixels.

Contact Me for safe Installation, No brick risk (Paid)

Disclaimer:

  • Rooting May Void Your device warranty
  • Make a backup & Move it to Safe Place Like Pen drive or PC.
  • Make Sure Your Phone at-least 50% charge to Prevent accidental shut down during the Rooting Process.

Download Files:

Note: any issue in fastboot, flash using flashtool

How to Install twrp Recovery on Telstra Evoke Plus:

1. Prepare the Phone:

  • From Settings Enable developer options. for that Go to Setting>About phone>tap 5-6 times on software version>done. Now Go back /additional settings/ developer options & USB debugging > Turn ON, OEM unlocking > Turn ON.

2. Prepare Your Computer & Setup Platform tool:

  • Download & Install latest adb fastboot driver on your computer
  • Download & setup platform tools with in your computer.
  • extract Downloaded recovery.img & vbmeta.img in platform tool folder

3. connect to fastboot:

  • switch off Phone, Now press power & volume down key, once you see fastboot logo connect it to computer by using usb cable

4. unlock bootloader:

  • Open Command Window in Platform tool folder and send below code
fastboot oem unlock
or
fastboot flashing unlock
  • on phone confirm unlock warning by pressing volume up key

5. Flash twrp Recovery:

  • Open command window on Platform tool Folder, for that go to platform tool folder, in the address bar type ‘cmd’ & hit enter
  • Now Send below code
fastboot flash recovery recovery.img

6. Disable boot Verification- AVB/ Fix bootloop:

  • for that send below code
fastboot format userdata
fastboot flash vbmeta vbmeta.img

once done, don’t bootup Phone, directly go to recovery (by holding Volume+ & Power Key) & Flash magisk 21.4.zip & No verity opt encrypt.zip

How to Root Telstra Evoke Plus:

  • Download & Move Magisk 21.4 and No_verity_opt_encrypt.zip to device storage.
  • switch off Phone, Reboot Phone to twrp recovery by Pressing volume up and Power button
  • Make a Nandroid backup
  • wipe userdata
  • Flash Magisk 21.4 and No_verity _opt_encrypt.ZIP via Install.
  • Reboot System now