(update) unofficial twrp 3.5.1 for Cubot X18

Download twrp 3.5.1 Root Cubot X18:

unofficial build of twrp 3.5.1 have Now been available for the Cubot X18, user who own Cubot X18 can Root it by following the below Instructions.  to Install twrp Recovery on Cubot X18 First You need to unlock it’s bootloader after that You can Root it by Flashing Magisk 21.4.zip.

Cubot X18 Run on Mediatek MT6737 SoC along with Android 7.0 3GB of RAM and 32GB of Internal storage. the device come with 5.2 Inch IPS display with the resolution of 1080 X 1920 Pixels.

Contact Me for safe Installation, No brick risk (Paid)

Disclaimer:

  • Rooting May void Your device warranty
  • Make a backup & move it to safe Place like Pen drive or PC.
  • Make sure your Phone at-least 50% charge to Prevent accidental shut down during the rooting Process.

Download Files:

  1. Magisk 21.4
  2. Vbmeta.img
  3. No verity opt encrypt zip
  4. twrp 3.5.1 for cubot X18
  5. Platform tools/adb Fastboot tools

Note: flash vbmeta to fix any bootloop issue.

How to Install twrp Recovery on Cubot X18:

1. Prepare the Phone:

  • From settings enable developer options. for that go to Setting>About phone>tap 5-6 times on software version>done. Now Go back /additional settings/ developer options & USB debugging > Turn ON, OEM unlocking > Turn ON.

2. Prepare Your Computer & Setup Platform tool:

  • Download & Install latest adb fastboot driver on your computer
  • on your computer download & extract platform tools. then download & extract recovery.img & vbmeta.img in platform tool folder

3. connect to fastboot:

  • switch off Phone, Now press power & volume down key, once you see fastboot logo connect phone to computer by using usb cable

4. unlock bootloader:

  • Open command window in Platform tool folder and send below code
fastboot oem unlock
or
fastboot flashing unlock
  • on phone confirm unlock warning by pressing volume up key

5. Flash twrp Recovery:

  • Open command window on Platform tool Folder, for that go to platform tool folder, in the address bar type ‘cmd’ & hit enter
  • Now send below code
fastboot flash recovery recovery.img

6. Disable boot Verification- AVB/ Fix bootloop:

  • for that send below code
fastboot format userdata
fastboot flash vbmeta vbmeta.img
  • then reboot to twrp recovery by sending below code:
fastboot boot recovery.img
OR
fastboot reboot recovery

How to Root Cubot X18:

  • Download & Move Magisk 21.4 and No_verity_opt_encrypt.zip to device storage.
  • Reboot Phone to twrp recovery by Pressing volume up and Power button
  • Make a Nandroid backup
  • wipe userdata
  • flash Magisk 21.4 and No_verity _opt_encrypt.ZIP via Install
  • Reboot system now