(update) twrp 3.3.0 for Dexp BL250

Download twrp 3.3.0 Root Dexp BL250:

unofficial build of twrp 3.3.0 have Now been available for the Dexp BL250 user Who own Dexp BL250 can Root it using the Below Instructions.  to Install twrp Recovery on Dexp BL250 First You need to unlock it’s bootloader after that You Can Root it by Flashing Magisk 21.4.zip.

Dexp BL250 Run on MT6737 SoC along With Android 8.1 1GB of RAM and 8GB of Internal Memory. it come with 5 Inch IPS Display with the Resolution of 720 X 1280 Pixels.

Disclaimer:

  • Rooting May Void Your Device Warranty
  • Make a backup & Move it to Safe Place Like Pen Drive or PC.
  • Make Sure Your Phone at-least 50% Charge to Prevent accidental Shut Down during the Rooting Process.

Download Files:

  1. Magisk 21.4
  2. vbmeta.img
  3. twrp 3.3.1 Dexp BL250
  4. Platform tools/adb Fastboot tools

Note: Flash vbmeta to fix any bootloop issue..

How to Install twrp Recovery on Dexp BL250:

  • Download & Setup Platform tools
  • Download and Extract recovery.img & vbmeta file In Platform tools Folder.
  • Reboot Phone to bootloader by together holding Volume Down and Power Button
  • Connect Phone to PC using the usb cable.
  • open CMD in the Platform tools Folder and Send below Code.

Check Device by Sending below Command:

fastboot devices

flash Recovery by Sending below Command:

fastboot flashing unlock
fastboot flash recovery recovery.img
fastboot flash vbmeta vbmeta.img
fastboot boot recovery.img

How to Root Dexp BL250:

  1. Download & Move Magisk 21.4.zip to Device Storage.
  2. Reboot phone to twrp by Pressing Volume up and Power button
  3. Make a Nandroid backup
  4. Flash Magisk 21.4 and No_verity _opt_encrypt.ZIP via Install.
  5. Reboot System now