unofficial twrp 3.1.1 Root Chuwi Hipad

Download twrp 3.1.1 Root Chuwi Hipad:

unofficial build of twrp 3.1.1 have Now been available for the Chuwi Hipad user Who own Chuwi Hipad Smartphone can Root it using the Below Instructions.  to Install twrp Recovery on Chuwi Hipad First You need to unlock it’s bootloader after that You Can Root it by Flashing Magisk 19.2.zip.

Chuwi Hipad Run on Mediatek MT6797X SoC along With Android 8.0 3GB of RAM and 32GB of Internal Memory. it Come with 10.1 Inch IPS Display With the Resolution of 1920 X 1200 Pixels.

Disclaimer:

  1. Rooting May Void Your Device Warranty
  2. Make a backup & Move it to Safe Place Like Pen Drive or PC.
  3. Make Sure your Phone at-least 50% Charge to Prevent accidental Shut Down During The Rooting process.

Download Files:

  1. Magisk 19.3
  2. No verity opt Encrypt
  3. twrp 3.1.1 Chuwi Hipad
  4. Platform tools/adb Fastboot tools

How to Install twrp Recovery on Chuwi Hipad:

  • Download & Setup adb Fastboot tools/Platform tools
  • Download and Extract recovery.img [Must rename recovery.img] file In the adb tools Folder.
  • Enable usb Debugging and Oem unlock From Developers options
  • Reboot Phone to Bootloader by holding Volume Down and Power Button
  • Connect Phone to PC using the usb cable.
  • Now open CMD in the adb tools Folder and type below Code.

Check Device by Sending below Command:

fastboot devices

unlock bootloader by Sending below Command:

fastboot oem unlock
if fail
fastboot flashing unlock

flash Recovery by Sending below Command:

fastboot flash recovery recovery.img
fastboot boot recovery.img

Method 2: Install With SP Flash tools:

  1. Download and Extract SP Flash tools on PC
  2. Download and Install Mediatek V-COM Driver on PC
  3. Now Download & Extract twrp image with Scatter
  4. Run SP Flash tools From Main Screen Select Scatter File Navigate Scatter.txt File form the twrp Folder
  5. Now From the Partition List Select Recovery Partition only. and then Double Click on it Select twrp recovery.img File
  6. Now Click Download and Connect Your Switched off Phone. Done.

How to Root Chuwi Hipad:

  1. Download Magisk 19.3.zip From above and Move it to Device Storage.
  2. Reboot Phone to twrp By Holding Volume Up and Power button
  3. In the twrp Make a Nandroid backup.
  4. Flash Magisk 19.3.zip & No verity opt encrypt.zip Via Install
  5. Reboot  System Now